It’s happened to all of us at one time or another. We’re trying to tighten metal screws on our laptop, giving it that last turn only to hear the dreaded sound against metal, followed by a sense of dread as we realize the screw is now stripped. This article will show you how to remove a stripped laptop screw.
Contents
Use a Screwdriver That Fits
A screwdriver is a hand tool used to turn screws. A typical screwdriver has a handle and a shaft with a pointed tip on one end and a flat or Phillips head on the other. It is also possible to get specialty screwdrivers such as star drivers and Torx drivers, which have different shaped tips designed to fit specific types of sheet metal screws. When using any type of screwdriver, it is important to make sure that you use the correct size for the job.
The shaft should be long enough to provide leverage but not so long that it becomes difficult to control. The tip should be sharp so it can easily penetrate the damaged screw head, and the head should be strong enough to apply pressure without bending.
Use a Power Drill
If you have a power drill, you can use it to remove a stripped stainless steel screw. First, make sure the drill is set to reverse. Then, position the tip of the drill bit into the center of the screw head and apply pressure while you turn the drill on. The spinning action of the drill will cause the slotted screw to loosen and eventually come out.
Use Super Glue
Super glue can be used as a last resort to remove a stripped screw. First, apply a small amount of super glue to the tip of a flat head screwdriver. Then, insert the tip of the screwdriver into the center of the screw head and twist until the screw loosens. The super glue will act as an adhesive, holding the screwdriver in place so you can loosen the screw heads.
Use a Dremel Tool
A Dremel tool is a small, handheld power tool that can be used for various purposes, including removing stripped screws. To use a Dremel to remove a stripped screw, simply attach a metal cutting bit to the tool and position it over the center of the screw head. Apply pressure and turn on the tool. The spinning action of the bit will cut through the screw head, allowing you to remove it.
Use an Impact Driver
An impact driver is a powerful tool that removes laptop screws and bolts stuck or stripped. To use an impact driver, simply position the tip over the center of the screw head and apply pressure. The impact driver will deliver a quick, powerful blow that will loosen the screw and allow you to remove it.
Use a Hammer
If you don’t have any power tools, you can try using a hammer to remove the stripped screw. First, position the point of a screwdriver or other sharp object into the center of the screw head. Then, hold the screwdriver’s handle with one hand and use the other hand to strike the end of the screwdriver with a hammer. The impact will cause the screw to loosen and eventually come out.
Use Vice Grips
Vice grips are pliers that can remove screws, nails, and other fasteners. To use vice grips to remove a stripped screw, simply position the jaws of the tool over the head of the screw and tighten the grips. The vice grips will bite into the metal of the screw head and allow you to turn it and remove it.
Use a Hacksaw
A hacksaw is a hand tool that can cut through various materials, including metal. To use a hacksaw to remove a stripped screw, simply position the blade of the saw over the center of the screw head and begin sawing. The saw will cut through the metal of the screw head, allowing you to remove it.
Use an Air Chisel
An air chisel is a powerful tool that uses compressed air to create a chiseling action. To use an air chisel to remove a stripped screw, simply position the tool’s tip over the center of the screw head and apply pressure while you turn on the compressor. The chiseling action of the air will quickly remove the screw.
Use a Rubber Band
If you don’t have any power tools, you can try using a rubber band to remove a stripped screw. First, position the point of a screwdriver or other sharp object into the center of the screw head. Then, hold a rubber band over the screwdriver’s end with your thumb. The rubber band will act as a cushion, absorbing the impact of your hammer blows and allowing you to remove the screw.
Use a Knife
A knife can be used to remove a stripped screw if you don’t have any other tools available. First, make sure the knife is sharp so it can easily penetrate the metal of the screw head. Then, position the tip of the knife into the center of the screw head and twist. The knife will cut through the metal and allow you to remove the screw.
Use a Nail
If you don’t have any tools available, you can try using a nail to remove a stripped screw. First, find a nail that is slightly smaller in diameter than the screw head. Then, position the tip of the nail into the center of the screw head and tap it with a hammer. The impact will cause the screw to loosen and eventually come out.
Use an Exhaust Fan
If you have an exhaust fan, you can use it to remove a stripped screw. First, position the screwdriver’s tip into the center of the screw head. Then, turn on the exhaust fan and hold the screwdriver in place. The suction from the fan will cause the screw to loosen and eventually come out.
Factors To Avoid When Removing Screws
- Avoid using too much pressure when trying to remove a screw, as this can strip the head or break the screw entirely.
- Avoid using power tools on stripped screws, as this can damage the surrounding area.
- Avoid using heat on stripped screws, as this can damage the surrounding area or cause the screw to expand and become difficult to remove.
- Avoid using chemicals on stripped screws, as this can damage the surrounding area or cause the screw to rust.
- Avoid using brute force when trying to remove a screw, as this can damage the surrounding area or cause the screw to break.
Conclusion
There are a variety of ways that you can remove a stripped screw, but the best method will depend on the type of screw and the material it is made from. In most cases, you can use a power tool, such as an impact driver or a drill to remove the screw. However, if you don’t have any power tools available, you can try using a hammer or a pair of vice grips. If all else fails, you can always try sawing through the screw with a hacksaw or using an exhaust fan to loosen it.
- Best Laptop For Teletherapy (2022)
- The 6 Best Laptops For Construction Management (2022)
- How Long Does It Take To Charge A Laptop?
- How To Insert An SD Card Into A Laptop?
Leave a Reply